Orchids Salon

2 Tanses Tanning Beds - 1 Stand Up and 1 Lay Down - ONE year old
Paid over $25,000 for these beds in January 2009

Asking Price: $15,000

Model: TT-50 200w
Unit Width: 48 inches
Unit Depth: 48 Inches
Unit Height: 97 inches
Recommended Room size: 84 inches x 96 inches x 102 inches High
Power Consumption: 10.5 kW @ 220V
Power Factor: 90%
Draw: 53 amps @ 220V
Breaker: 70 amps @ 220V
Plug: NONE; Must Be HardWired
Voltage: 220-230v
A 110v outlet will be required to operate the Neon Accent Lighting.
If the unit will be connected & operated with a digital timer (ex. t-max 3A) an additional 110v outlet will be required.
The unit above requires a minimum voltage of 220 volts and can run up to 230 volts.
Note: ALL calculations (wattage, amps, draw, breaker size) are based on an incoming voltage of 220 volts. Higher voltage may require a bigger breaker size. (These units are inductive loads)
Incoming voltage less than 220v or greater than 230v will require a buck booster (step up transformer), which will increase the amperage and may require a bigger breaker size.
Air-conditioning requirements for the beds are not included in the electrical calculations.
Try to avoid all Siemens manufactured boxes and breaker; they will trip intermittently with tanning bed loads according to Siemens engineers.
Use a 60% maximum utilization on the power.



Model: Corona WIDE Body 40-VHR-3F5
Unit size: 90 inches x 42 Inches
Recommended Room size: 8’ x 7’
Power Consumption: 6.2 kW @ 220V
Power Factor: 90 %
Draw: 31 amps @ 220V
Breaker: 40 amps @ 220V
Plug: 6 foot Cable with NEMA 6-50P Plug
Receptacle Needed: NEMA 6-50R
Voltage: 220-230v
A 110v outlet will be required to operate the Neon Accent Lighting and the on-board T-max Digital 3A Timer.
The unit above requires a minimum voltage of 220 volts and can run up to 230 volts.
Note: ALL calculations (wattage, amps, draw, breaker size) are based on an incoming voltage of 220 volts. Higher voltage may require a bigger breaker size. (These units are inductive loads)
Incoming voltage less than 220v or greater than 230v will require a buck booster (step up transformer), which will increase the amperage and may require a bigger breaker size.
Air-conditioning requirements for the beds are not included in the electrical calculations.
Try to avoid all Siemens manufactured boxes and breaker; they will trip intermittently with tanning bed loads according to Siemens engineers.
Use a 60% maximum utilization on the power.

Attached Images

	Tanses TT-50.jpg (8.6 KB, 3 views)
	Corona Wide Body 40-VHR-3F5.jpg (14.7 KB, 1 views)